Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Lubes/Cleaners

White Lightning Clean Streak
$9.79 - $12.99
- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors
Tri-Flow Superior Lube
$5.99 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Tri-Flow Superdry Lube
$6.99
- Long lasting teflon paraffin wax and oil penetrant set up dry - Law prohibits orm-D materials from shipping by air
Tri-Flow Superior Soy Lube
$6.99
Tri-Flow Superior Soy Lube - advanced performance combining science and nature. This lube is a superior, light viscosity lube that allows for deep penetration into hard to reach moving parts. - Rapidly biodegradable formula, more than 90% will biodegrade in less than 28 days! - Formulated with natural soy oil and P.T.F.E. Specially formulated with the most advanced performing elements combined with natural soy for the environmentally conscious consumer. A blend of the finest quality renewable resource available treated with the most effective anti-oxidants, extreme pressure, anti-wear, PTFE and corrosion protection additives. High grade oils provide optimum lubrication under extreme temperatures (12 to 475F) and humidity. The formula and packaging were designed and manufactured taking steps to reduce environmental impact. The hand charged aerosol spray uses no chemical propellant!
Tri-Flow Synthetic Grease
$12.99
- All purpose waterproof synthetic grease with teflon - Clear formulation for quick/Easy contamination identification - Fits dualco-Style grease gun heads
Shimano S700 Oil for Alfine 11-Speed Hub
$127.00
One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub
SRAM DOT Disc Brake Assembly Grease
$11.00
DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems. - Recommended for lever pistons, hose compression nuts, threaded barbs, and olives
SRAM SRAM Butter Grease
$11.00
SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!
SRAM DOT 5.1 Hydraulic Brake Fluid
$13.00
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes
RockShox Rear Shock Air Can Lubricant (Maxima)
$0.05
This suspension fluid is recommended by RockShox for shock rebuilds. - 15W 50 - 1L bottle
RockShox Reverb Suspension Oil
$4.00 - $16.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
RockShox Dynamic Seal Grease
$11.00
• RockShox Dynamic Seal Grease (PTFE) • Recommended for rear shock service
RockShox Suspension Oil
$23.99 - $24.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
Rock-N-Roll Absolute Dry Bike Chain Lube
$6.99 - $18.50
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only
Pedro's Chainj Light Wet Lube
$10.00
Designed for mixed to wet conditions, Chainj is an advanced biodegradable vegetable/synthetic oil blend engineered to provide superior efficiency, wear protection, and durability. The vegetable oil is not only sustainable but also associates ionically with metal surfaces creating a resilient protective barrier for added life and increased anti-wear properties. Additionally, Chainj features detergent properties which actively dissolve and isolate dirt as you ride. Great for lubrication of parts too! - Dissolves and isolates dirt for lasting performance in mixed conditions - Superior durability, wear protection and lubrication - Biodegradable, non-toxic, vegetable/synthetic formula
Pedro's Ice Wax 2.0 Chain Lube
$12.00
- Most universal Pedro's lube - New high-performance formula lifts dirt away from the chain surface leaving a soft, Icy-Slick protection/Lubrication barrier
Pedro's X Dry Premium Dry Lube
$12.50
Formulated with Pedro's exclusive CleanTech Chemistry, X Dry uses advanced polymer technology that drys to a unique semi-fluid film and provides clean and long-lasting performance in dry to mixed conditions. Noticeably elevates efficiency, runs quiet, reduces wear, and repels water and grime. - Clean and long-lasting performance in dry to mixed conditions - Elevates efficiency, runs quiet, reduces wear, and repels water and grime - Safe plant-based ingredients
Pedro's Oranj Peelz Citrus Degreaser
$15.00 - $75.00
Oranj Peelz has quickly and effectively degreased drivetrains for more than twenty years using a unique citrus-based solvent/surfactant blend. Designed specifically for bicycle drivetrain degreasing, the powerful, biodegradable formula penetrates into every surface and quickly loosens and dissolves even the toughest drivetrain grime. The water soluble formula rinses easily leaving surfaces residue-free. - Heavy-Duty degreaser made from citrus extracts - Perfect for quickly dissolving and removing the toughest grease and grime - Low surface tension allows superior penetration for complete degreasing - Biodegradable, water-soluble formula easily rinses away
Pedro's Degreaser 13
$65.00
Degreaser 13 takes degreasing chemistry to new levels with performance that must be seen to be believed. Your drivetrain hasn't been this clean since the day you bought it! Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. Fully water soluble and further activated by light scrubbing and rinsing, the result is a spotless residue-free drivetrain with every surface cleaned completely. Pedro's advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.
Park Tool PolyLube 1000 4-Ounce
$6.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool Synthetic-Blend Chain Lube
$8.95
Keep your chain running smoothly with Park's Synthetic-Blend Chain Lube. It uses PTFE and a proprietary blend of oils to penetrate, reduce friction, prolong chain life, displace moisture and protect chains from rust and corrosion. Plus, it works great on cables, spokes, and derailleur and brake pivots, too.
Park Tool SuperGrip Carbon Assembly Compound
$12.49
Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.
Park Tool HPG-1 High Performance Grease
$13.99
HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube
Park Tool Bio ChainBrite
$14.95
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
Park Tool Cutting Fluid
$15.95
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
Park Tool RC-1 Press Fit Retaining Compound
$15.99
Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Park Tool TLR-1 Medium Strength Threadlocker
$15.99
Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Park Tool TLR-2 High Strength Threadlocker
$15.99
Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Park Tool PolyLube 1000 16-Ounce
$18.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool AP-1 Adhesive Primer
$27.99
Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.
Page 1 of 3 Next page