Lubes/Cleaners

- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air

One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub

Oranj Peelz has quickly and effectively degreased drivetrains for more than twenty years using a unique citrus-based solvent/surfactant blend. Designed specifically for bicycle drivetrain degreasing, the powerful, biodegradable formula penetrates into every surface and quickly loosens and dissolves even the toughest drivetrain grime. The water soluble formula rinses easily leaving surfaces residue-free. - Heavy-Duty degreaser made from citrus extracts - Perfect for quickly dissolving and removing the toughest grease and grime - Low surface tension allows superior penetration for complete degreasing - Biodegradable, water-soluble formula easily rinses away

Degreaser 13 takes degreasing chemistry to new levels with performance that must be seen to be believed. Your drivetrain hasn't been this clean since the day you bought it! Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. Fully water soluble and further activated by light scrubbing and rinsing, the result is a spotless residue-free drivetrain with every surface cleaned completely. Pedro's advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.

Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

This ultra-high-performance grease is ideal for use on bicycles. The low-friction formula resists water and contaminants without standing out on the bike Product details - Performance waterproof grease for bicycle bearings, seals, assembly, and more - The formula reduces friction while performing longer between service intervals - Superior water washout resistance stands up to power washing - Unscented and undyed - As with all grease, clean and remove old grease first to guarantee compatibility - Compatible with Loctite Threadlocker and all metals, plastics, and carbon fiber - Available in a wide range of sizes and dispensing methods - 3oz (85g) cartridge is most compatible with the Bontrager Grease Gun

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Additionally, it's very slick and tough and lasts as much as five times longer than petroleum grease.

Clean bikes run smoother and perform better. Finish Line's Premium Bike Care Value Pack is a 3-pack of their best-selling products: Multi Bike Degreaser, Dry Teflon Bike Lube, and Super Bike Wash Concentrate. These three 4-ounce bottles make it easier than ever to keep your ride in premium shape.

Shock Oil is a semi-synthetic formulation that combines the best of available oils and additives for a super suspension oil. It's fully compatible with all systems and internal components, seals and O-rings. Its viscosity stays constant as the temperature changes, so your shock feels the same whether you're roasting or freezing!

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

Titanium is a super-light, exceptionally strong material that's great for bicycle frames and components, yet it requires a little special care for the best results. To stop cold-welding, galling or seizing of titanium components and fasteners, Finish Line offers Ti-Prep Anti-Seize Lubricant. It's a premium blend of synthetic oils, graphite, bronze, copper and aluminum complex and works great as a conventional anti-seize for aluminum, stainless steel, and other specialty metals, too.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.

Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.

Reach for Finish Line's Citrus Degreaser when you've got tough grit and grime to cut through. Your parts clean up fast and then rinse residue-free with water. This degreaser is concentrated and water soluble so you can dilute it with up to 25 parts water for less difficult jobs. It's 100% biodegradable and completely non-toxic, too.

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Finish Line's Extreme Fluoro Grease is made with pure DuPont fluorinated ingredients for outstanding durability and unbeatable smoothness. It's recommended for use on precision parts, especially ceramic and conventional bearings, where you need maximum protection from the elements and heat. This low-friction grease even works great on cable wires, derailleur pivots, stanchions, pedal springs and other vital moving parts.

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

A high-performance bike degreaser that’s designed specifically for the unique needs of bicycles. A clean bike is a happy bike Our bike-specific degreaser makes it easy to keep things looking clean and running smooth. Bontrager's proprietary pH-neutral formula will keep your chain looking and feeling new without damaging the finish on your frame or components. Product details - High-performance bike degreaser is perfect for all drivetrains and bikes - Proprietary formula is Trek's factory-recommended bike degreaser - Can also be diluted in a 1:10 solution with water and used as Bike Wash - Pleasing citrus scent - Thoroughly spray drivetrain and clean with dedicated brush or chain cleaner device - 16 fl oz (473mL) spray bottle is easy to use and refillable - Also available in 1g/3.8L bulk bottle for easy and economical refills - Keep out of reach of children and do not ingest

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

- Recommended by DT Swiss for lubrication of star-ratchets on all DT Swiss hubs. Molykote tp 42 with 5% mineral oil add mixture