Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

$7.20 $9.00 20% Off
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$12.00 $15.00 20% Off
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$15.20 - $24.00 $19.00 - $30.00 Up to 20% Off
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$19.00 - $27.20 $19.00 - $34.00 Up to 20% Off
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
$22.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$27.00
Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.
$27.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$27.00
Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.
$27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$29.99
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
$30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$30.40 $38.00 20% Off
Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g
$32.99 - $49.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$34.00
Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.
$34.40 - $54.00 $43.00 - $54.00 On Sale
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
$38.00
Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g
$65.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
$65.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 204 g
$71.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.
$95.00
This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 204 g
$95.00
This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Due to the shape of the brake pad installation tabs, this model is not compatible with Centerlock or HSX rotors - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 204 g
$126.00
For the stop/start world of cyclocross, Avid makes the inimitable Shorty Ultimate Rim Brake. The ideal balance of power, control and weight, the Ultimates are the choice of pro crossers across the globe. They offer an open design that clears mud quickly while also dishing out serious stopping power and modulation. Just a twist of the in-line cable adjustment knob lets you dial in cable tension, and you can choose between a wide or narrow stance for increased mud clearance or power. And, the Shorty uses standard road cartridge pads for easy maintenance.
$129.00
This high-end version of the BB7 has a durable anodized finish and titanium hardware, as well as lighter brake pads. - For use with short cable-pull levers - Includes aluminum-backed organic pads - For use with short cable-pull levers - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 184 g
$24.99
- 2Mm thick stainless steel with standard 6-Bolt/44Bcd bolt pattern - Compatible with most disc brake systems - Includes (6) Torx bolts, (1) Torx wrench
$8.99
With a stiff, one-piece, co-molded design, Box Three™ Air Flow Brake Shoes provide the excellent stopping power and are the perfect choice for your next build. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. Pivoting posts aid installation and make toe-in adjustments simple and easy.
$14.99
Box Two Brake Shoes have cartridge pad holders to fit 70-millimeter replacement pads, making it easy to swap out worn pads or, for the style-conscious, to change pad colors. Adding to the function, we designed these shoes with a pivoting post, so setting the toe-in is super easy. Features: - 70-millimeter replacement pads - Pivoting posts - Triple Compound Specs: - Material: 6061-T6 Aluminum - Pad Material: Triple Compound - Weight (per pair): 57 grams / 2.01 ounces
$24.99
Box One 70mm Brake Shoes feature a stiff, cold-forged, and CNC-machined cartridge body and triple-compound, 70-millimeter pads for superior braking. Mounting posts that pivot allow for perfect pad alignment, while silver machined accents and laser-etched graphics offer refined aesthetics. - 70-millimeter replacement pads - Pivoting posts - Triple Compound - silver machined accents
$24.99
The Box Three Disc Brake Rotor is a Stainless Steel, 6 bolt rotor designed for BMX Race. Utilizing a small size and rounded outside edges for safety is the optimal size for any BMX Race bike. FEATURES: - ISO 6 bolt brake/hub interface - Rounded outside edges - Lightweight Cutouts - High quality stainless steel rotor - High quality locking steel T-25 rotor bolts included
$24.99
- Cold forged, CNC-machined cartridge body with self-aligning pivoting posts - Triple-compound 70mm pads
$29.99
Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.
$29.99
Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.
$34.99
Box One 70mm Carbon Brake Pads were formulated with a special compound compatible with carbon fiber rims. This helps keep the heat down while still creating high-performance stopping power. Paired with our Box One Brake Pad Cartridge Body so you can pull them out of the bike and put them right on the bike! Sold as a pair. Features: - High Performance - Stopping Power Specs: - Material: 6061-T6 Aluminum - Weight: 55 grams
$39.99
DESCRIPTION The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. FEATURES - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three™ Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, Stainless Steel Hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm
$49.99
The Box One Disc Brake Adapter is designed to improve braking control on frames where disc brakes were not standard. Compatible with 2 types of dropouts and 3-10mm hubs, the Box Disc Brake Adapter goes over your hub’s axle and mates with the frame’s dropout in the right configurations allowing mounting of a standard post mount disc brake caliper. Please note this product is NOT universally compatible. We strongly recommend reading the Compatibility and Installation instructions for details before purchasing Compatibility: - Box Three Pro Disc Hub - Box Three Brake Caliper - Box Three 140mm Disc Brake Rotor - ALL Box Brake Levers - Box Linear Brake Cables Specs: - Post Mount Caliper Compatibility - 140mm Brake Rotor Only - 6061-T6 Aluminum - Standard 10mm Dropout - 60g - Fits 3 - 10mm hubs (See Compatibility Below) - 150lb Rider Weight Limit
$49.99
The Box One Disc Brake Adapter is designed to improve braking control on frames where disc brakes were not standard. Compatible with 2 types of dropouts and 3-10mm hubs, the Box Disc Brake Adapter goes over your hub’s axle and mates with the frame’s dropout in the right configurations allowing mounting of a standard post mount disc brake caliper. Please note this product is NOT universally compatible. We strongly recommend reading the Compatibility and Installation instructions for details before purchasing. FEATURES - 3-10mm hub - 6061-T6 aluminum - 140mm Brake Rotor Only - Post Mount Caliper Compatibility - 150lb Rider Weight Limit
$64.99
The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension. Features: - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, stainless steel hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm - Includes Box Two Black Brake Housing and Stainless Steel Cable
$64.99
The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension. - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, stainless steel hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm - Includes Box Two Black Brake Housing and Stainless Steel Cable
$79.99
- Cold-forged, CNC-machined 6061-T6 aluminum with built-in return spring - Clamp integrates with ODI Lock-On grips - 50g
$79.99
Box One Genius brake levers are the first ever to incorporate a clamp for ODI Lock-On grips. This ensures that your grips stay put while eliminating the need for an extra clamp. At roughly 50 grams, these cold-forged and CNC-machined levers beat any other on the market. Genius levers have a built-in return spring and are fully compatible with carbon handlebars. The Mid reach lever features a new design that puts it in the same reach position as the Long, but with a more BMX-specific blade for better one-finger leverage. Other features include adjustable reach, a titanium mounting bolt, and stainless steel hardware. Genius levers are designed to work with linear-pull brakes. They are excellent for BMX, mountain, city, urban, and tandem flat-bar bicycles.
$119.99
- Cold-forged 6061-T6 aluminum arms, available in 85mm or 108mm - Precision sealed bearing pivots, titanium and stainless steel hardware - Flexible cable noodle and streamlined cable fixing point - 35 millimeters of vertical brake pad adjustment
$119.99
For Box braking we’ve limited the use of our Oversized Technology to the V area since the levers need to be minimalist and largely act as a remote for the V-Brakes. To reduce lateral deflection at the V we chose to enlarge the pivot areas and arms while tightening tolerances at their interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with brake power delivery, but you’ll also feel the instant response of deceleration. Key differences: The Box One V-Brake are the only brakes in the Box line-up to be blessed with Oversized Technology. They are also the only model to use sealed precision bearings to further reduce non-rotational movement. The 108mm long-reach brakes are excellent for BMX, mountain, city, urban and tandem bicycles using linear-pull-compatible levers. The 85-mm short reach (AKA mini-V) brakes are an excellent choice for cyclocross or drop-bar gravel bikes.
$13.99 - $24.99
- Designed for caliper and U-brakes - Forged alloy lever / 2-piece hinged aluminum bracket - 2 finger - 22.2mm (7/8") clamp - Return spring - 93g each
$15.99
- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each
$18.99 - $33.99
- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 166g pair
$23.99
- Melt forged aluminum construction - Coiled spring tension adjust
$23.99
- Melt forged aluminum construction - Coiled spring tension adjust
$23.99
- Melt forged aluminum construction - 95mm arm length - Dual tension adjusters - Front/Rear: Either - Includes 55mm pads - 179g each
$25.99
- Forged alloy V-brakes with 103mm arms - Brilliantly anodized in a variety of colors - Compatible with 70mm threaded brake pads - Front or rear - 21mm–35mm reach
$27.99
- Forged alloy brake levers with reach adjustment - Compatible with linear pull and mechanical disc brakes - Left/Right: Set - Fits 22.2mm (7/8") handlebars
$2.99
A must-have item for all your delicate department store bike repairs.
$6.99
Shimano compatible road caliper brake pads from Bontrager. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Sleek brake pads and cartridges are Shimano compatible - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs
$41.45
2-piece center lock rotors for use with Campagnolo hydraulic brake systems. - Rounded external edge prevents cutting of skin in case of contact with rotor - Inner aluminum spider maximizes heat dissipation - EKAR rotors are strong 1.85mm thick stainless tempered steel - Strong, durable, light & resistant to corrosion Specifications: - Rotor Type: Two Piece - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds
$60.45
The Campagnolo 03 rotors were designed to ensure optimal resistance to overheating, thus guaranteeing greater braking capability even in the most critical situations. - Designed to be used with Center Lock or AFS systems - Feature a rounded UCI compliant edge for safety and easy insertion into calipers
$62.45
While the other components of the drivetrain take care of acceleration, the Centaur groupset also offers fantastic control thanks to newly designed brakes weighing around 50 grams less than competitors’ equivalent models. For the cyclist this is a major plus, as they know they can count on the extreme control offered by such powerful and adjustable brakes. Push harder and go faster, Centaur brakes will be your faithful ally as you power to victory. - Dual pivot front and rear brakes. - Forged solid aluminum brake arms provide increased stiffness. - Includes special compound brake pads for optimal braking on both wet and dry surfaces. - Adjustable pad holders allow for micro adjustment - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Position: Set - Brake Lever Actuation: Short Pull - Pad Type: Cartridge - Weight: 325 grams
$99.45
The Campagnolo Chorus brakeset offers powerful yet modular braking performance, ensuring excellent levels of control. - Dual pivot design guarantees more powerful braking than a single pivot, especially when the pads are close to the braking surface - Forged alloy skeleton arms are lightweight and stiff - Adjustable pad holders allow for micro adjustment - Pad coupling/uncoupling system for fast and secure pad replacement Specifications: - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Lever Actuation: Short Pull - Pad Type: Cartridge - Brake Position: Set - Weight: 330g
$204.95
Campagnolo strives to always offer the best solutions, no matter what frame or tire the cyclist has chosen. As manufacturers begin to develop frames and fork designs that take advantage of the aerodynamic gains of direct mount brakes, the Campy Tech Lab has worked to make new Campagnolo Direct Mount brakes that can guarantee the Campagnolo quality and performance standards. Through the self-balancing design, this new braking system by Campagnolo provides a completely symmetric and efficient brake application. In addition, the extremely stiff structure of the new Campagnolo Direct Mount brakes ensures superior stopping power, whilst the design elements take inspiration from the aerodynamics of the brake and are enhanced by the new sealed structure of the brake levers themselves. In addition to pure performance, a great deal of attention was given to ease of use and adjustment. The goal was to guarantee that the Campagnolo brake would be both easier to fit and intuitive and simple to adjust compared to any model available. That was made possible through the stiff structure positioned in the rear part of the brake, enabling rapid fitting that does not require external brake boosters, even on the weakest chainstays.
$274.95
The World Tour teams trust the braking response of the Super Record brakes and dozens of Pro Continental and Continental teams turn to Record brakes to take on the World Tour champions. To meet this requirement, Campagnolo designed the Record brakes with the same braking performance of the Super Record, so that the braking response is consistently decisive and immediate. The braking power is entrusted to the stiffness of the new structure, which is sealed and offers a strong aerodynamic impact, along with the Campagnolo brake block compound developed by the Campy Tech Lab in Vicenza. If necessary, it is easy for either the mechanic or the racing athlete to act on the cable tightener register.
$322.45 - $403.95
The Campagnolo EKAR Ergopower Shift/Brake Levers and Disc calipers were designed with gravel riding in mind. Easy, intuitive shifting mechanisms, and comfortable levers make this 1x13-speed system a desirable option for gravel riders. - Precise, quick shifting with One-Lever-One-Action and positive engagement with the efficient 1x13-speed Ekar drivetrain means a perfect change every time - Lever 3 has been redesigned so that it is easy to activate from the drops - Ultra-Shift mechanism allows you to up-shift 3 gears with one action - Vari-Cushion hoods provides comfortable, safe grip in any riding position and any off-road conditions - Additional laser-cut texture on lever blades and controls is sweat- and wear-resistant for an enhanced grip - Ergonomic adjustable reach to suit any hand or finger size Specifications: - Pad Compound: Organic - Brake Caliper Mount: Flat Mount - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy EKAR - Adjustable Reach: Yes - Drivetrain Speeds: 13
$420.45
Maximum performance, steep slopes, and high speeds are manageable and attainable only when armed with total safety and confidence in powerful, modulable braking. The new Super Record brakes ensure the shortest braking distance and continuous total control of the braking power transmitted thanks to the new Super Record shifting system and Campagnolo's proven experience in brake block compounds. Campagnolo developed the Dual Pivot fulcrum system because the Super Record users demand exceptional braking performance. The titanium screws also enable you to reach a level of weight and aesthetic impact on par with Super Record standards.
Page 1 of 3 Next page