Bells/Noise Makers

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

- Arguably the most fun way to alert other riders or pedestrians of your presence - Classic bugle-style horn has a deep tone - Easily mounts to bicycle handlebars without tools - Classic steel horn with a large rubber bulb and a gloss painted surface - Plastic bracket with silicone strap fits a wide variety of handlebars

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

Electra's Chrome Ringer Bell is a classic accessory that complements bikes of any vintage. This stylish, shiny bell has a unique 'ring-ring' sound and for easy installation it simply clamps onto your handlebars.

• Smaller version of popular ding-dong bells • Cheerful "ding-dong" doorbell style ring • Fits standard bicycle handlebar • Includes attachment hardware

If ink is too permanent an expression of your love for your bike, check out Electra's Rose Tattoo Bell. This bold bell has a pleasant 'ding' sound and for easy installation it simply clamps onto your handlebars.

The Incredibell Woodpecker is unique in the annals of bells. Even though it doesn't ring like a traditional bell does, it certainly will alert others of your approach. The pivoting ringer makes it easy to use in a variety of positions on the handlebars. The dual- size clamp fits handlebars with 21.7mm to 26mm diameters.

This is the most intriguing new bell anyone has ever seen. It fits on any 22mm handlebar just like a grip shift. It’s great for bicycles that have one side of the handlebar free of shift levers (both sides can have brake levers): cruisers, town bikes with only rear shifting, kids’ bikes. The sound of the ring is very musical. - Dome Diameter: 53mm (2.1") - Fits handlebars with 22mm outside diameter. - Weight 2.1 ounces

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm (.87-inch) outside diameters. - Dome Diameter: 44mm (1.6")

Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters

Little, Light, & Loud! Our Original Incredibell has been redesigned for quick and easy mounting on nearly any handlebar. The pivoting dinger can be rotated to any position.

A bicycle bell with a quality sound is how you say hello in Electra. - Proprietory Spring Ringer - Aluminum metal with a polished finish - Let your presence be known, in style!

How you say "hello" in Electra. - Oversized bell with cheerful "ding-dong" doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Oversized bell with cheerful ding-dong doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware

The necessary final touch on your favorite bicycle, Electra's Ding Dong Bell is the perfect form-meets-function accessory. This classy bell has a pleasant ding-dong sound and simply clamps onto your handlebars for easy installation. Pick the one that expresses you! - Oversized bell with cheerful "ding-dong" doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

The wheels on your bike spin, so why not your bell. Vintage-style spinner bell produces a great ring as it twirls around. • Top your bell with a cap from your favorite beverage. The Bottlecap Bell has a top that is shaped like a bottle so you can put your favorite cap on the top • Bottlecaps can easily be replaced when it is time for a new one • Fits standard bicycle handlebar • Includes attachment hardware

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Show the world your pool hall prowess with Electra's Eight Ball Bell. This stylish bell has a pleasant 'ding' sound and for easy installation it simply clamps onto your handlebars.

Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

Fly the colors on board your favorite cruiser with Electra's Jolly Roger Bell. This pirate-themed bell has a pleasant 'ding' sound and it simply clamps onto your handlebars for easy installation.

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware