The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inches\u001D from end of bar
Stop looking for footstools to get your bikes on and off your roof rack. Thule's Criterium makes mounting bikes much easier. Its sculpted wheel tray and support arm keep your bike in position while you secure it to the rack, while the rack-level dial-activated clamp firmly and safely grips the bicycle by the down tube. Unloading is a breeze, too. A push-button release frees your ride in the blink of an eye. The Criterium's dual-action wheel strap fits all tire sizes. The Criterium fits on square and round crossbars (sold separately).
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. The streamlined, seamless look is achieved with the aero Rapid aluminum load bar. But these aren't just sleek looking, the aero design cuts down on wind resistance and noise. Your car's rails are fully protected thanks to the integrated rubber lining. And you get maximum rack strength and a custom fit from the rubber-coated steel straps.
Be the envy of all the boaters at the river with the EvenKeel's ingenious and thrifty saddle-style rooftop rack. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4.
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
Yakima's Spare Tire Carrier lets you conveniently store your vehicle's spare tire inside your Yakima LoadWarrior or MegaWarrior cargo basket (each sold separately). It holds up to a 35-inch tire, locks with a padlock (sold separately) and leaves plenty of room in the basket for additional gear storage.
$219.00 - $219.99
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Our new premium fork mount, the low-profile HighSpeed, is streamlined, strong, and versatile. It easily transports mountain, road, and fat-tire bikes and fits both quick release and thru axles. Bikes are secured using the new and easy-to-use TorqueRight knob for a precise and strong hold. The sleek and stylish HighSpeed tray is designed for maximum hatch clearance. Universal mounting hardware fits most roof racks. - Securely carries a variety of bikes including road, mountain and up to 5" fat-tire bikes - Fits Yakima round, square, factory, or aerodynamic bars - Seamlessly carries both quick-release (9mm) and thru-axle bikes (12mm, 15mm, 20mm) - New TorqueRight knob quickly and easily secures the bike with precision. - Sleek, low-profile tray minimizes hatch interference and accommodates tires up to 5" wide - Tool-free, universal mounting hardware fits most roof racks - Carry quick-=release 9 x 135mm fat bike with the Optional Fat Bike Adapter Kit (sold separately) - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks to the TailWhip cable and crossbar attachment to secure your bike and mount to your roof rack. For additional security add a lock to the TorqueRight knob. (SKS sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 9.60 lbs. - Dimensions: L 54.50 in x W 9.00 in x H 4.75 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Yakima's Q Stretch Kit enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It works with Q Towers.
Anything you can put on the water you can put on a pair of these 20" foam pads. They're designed to protect your gear and crossbars during loading and on the road. - Fits round and square crossbars. - 20" wide foam pads for flexible configuration - Fits Yakima round and square crossbars Works great with BigStack, KayakStacker or Heavy-Duty Straps - Comes with 2 pads per package
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Thule says their Fairing is a stylish roof-rack accessory that decreases noise and wind resistance. But we both know what you'll use it for: plastering it with all your stickers. That's okay, we do the same thing. This polycarbonate shield fits both square and Rapid Aero crossbars (sold separately), comes in several widths to fit a wide range of vehicles, and is built for rigidity to alleviate wind-slap.
There's nothing more annoying than riding in a car with a bunch of unwieldy poles and paddles poking you in the eyes. Get them out and up on your rack with these mounts. They'll strap down anything up to 5" in diameter from oars, ski and fishing poles to PVC pipe on your way home from the hardware store. - Holds a broad range of sizes and shapes up to 5" diameter - Removable paddle pad for more versatility - Corrosion-resistant buckles - Hypalon straps wrap around smaller items and hold them firmly in place - Great for carrying paddles, oars, masts, ski poles, fishing poles, PVC pipe, etc. - Comes with 2 mounts per package
The SUPDawg makes launching your board easier than ever! Comes fully assembled out of the box, features integrated rollers for easy loading and includes SKS locks for aprés-paddle security. Holds up to two 36" wide boards. -Fully assembled out of the box -Tool-free installation Integrated rollers for easy loading of oversized SUP boards -Fits Yakima round, factory, aero and square bars -Slider adjusts to boards up to 36" wide -Soft padding cradles and protects boards -Integrated strap management stows straps during travel -Premium, sleek glossy black finish compliments modern vehicle types -Includes everything needed to carry up to 2 SUP boards -SKS Locks included; locks racks and board -Minimum crossbar spread of 24\u001D inches or more
$165.00 - $185.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
Thule’s UpRide is a universal upright bike rack with no frame contact, providing fast and secure mounting and maximum frame protection. - Ratcheting wheel strap quickly secures back wheel to tray - Maximum bike weight up to 20 kg. - No bike frame contact is made as the hook securely grabs the front wheel Suitable for bikes with carbon frames - Versatile design accommodates bikes with non-traditional frame designs, rear suspension, and bottle cages - Simple interface for switching carrier from one side of your car to the other - Fits most 20–29” wheel bicycles with tires up to 3" wide (up to 5” with Thule UpRide Fatbike Adapter, sold separately) - Locks the bike to the bike rack and the bike rack to the vehicle (locks sold separately)
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Traverse fitting kit required for perfect fit of the roof rack to a specific car. Compatible with Thule Traverse 480 and 480R Feet only.
Secure, sleek, and simple to use, the HighRoad is Yakima's newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Universal mounting hardware fits most roof racks. - New wheel hoop fits 26" to 29" wheels and tires from 23mm to 4.0" with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame—a great option for carbon fiber bikes and custom paint jobs - Sleek, low-profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 18.00 lbs. - Dimensions: L 56.00 in x W 9.50 in x H 4.50 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
One person can load and unload a boat with this unique retractable arm that fits inside your Thule load bars. - Supports up to 50% of the kayaks weight and prevents vehicle contact - Integrated load stop prevents boat from sliding off bar - Holds nearly every kayak shape and size - Fits Thule square bar rack system only
Say hello to the SUPPup—a faithful companion with soft padding to hug your board, self adjusting slider for varying board widths, and straps that stow away for travel. - Fully assembled out of the box - Fits Yakima round, square, factory and aerodynamic crossbars - Integrated strap management stows strap ends for travel - Soft padding cradles your board - Slider adjusts to boards up to 36" wide - Includes everything needed to carry up to 2 SUP boards - Minimum crossbar spread of 24” or more
Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of. - Fits Yakima round, square, factory or aerodynamic crossbars - Zero contact with frame; carbon fiber and custom paint jobs are protected - Accommodates disc brakes, thru axles, and full suspension bikes - Holds bike upright while you secure the bike to the mount - Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike) - No tools or assembly required - Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7" - SKS Locks sold separately - 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 13.00 lbs. - Dimensions: L 56.00 in x W 7.00 in x H 7.50 in - Minimum Crossbar Spread 16.00in - Maximum Crossbar Spread 42.00in - Limited Lifetime Warranty
Stronger and more versatile than factory racks, this rail grabber installs easily by clamping onto flush or raised side rails. - Low profile provides a sleek, integrated look for your roof rack - Includes onboard tool for easy on/off - Lockable with SKS Locks (sold separately) - Kit includes four RailGrab towers and two 58-inch crossbars
Yakima's Control Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory track systems). The Control Towers attach to your factory track system with Yakima's vehicle-specific landing pads and they have die-cast components for a sturdy hold.
This premium vertical carrier combines maximum strength and protection with greater versatility by folding down when not in use. - Folds down when not used for increased overhead clearance and improved fuel economy - Wide mouth J-profile offers easier loading and unloading - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal
Your surf, paddle or sail board gets a protective, cushy ride on a pair of these 16" EVA-molded pads. Fits nearly any size crossbar right out of the box and features an aerodynamic design that reduces drag and looks great. - Two 16" wide EVA-molded pads that provide a cushy ride for your board - Fits round, square, factory and aerodynamic crossbars right out of the box. - Optimized for aerodynamic bars. - Our SoulPads are sold separately
Page 1 of 1